DIRECTV Infrared Pass Through Cable 6 Foot (DIR-IR-PASS) DirecTV receiver IR pass-through
DirecTV receiver IR pass through
This pass thru cable connects a DirecTV H25 Receiver to a television. The cable utilizes the IR sensor of the television to simultaneously control the receiver box from your remote control. This cable makes the remote signal transition seamlessly between the television and receiver. This is the DirecTV receiver IR pass through interface wire for passing IR remote control command information through a television (with the appropriate jack connection) to a DRE type receiver which is installed either behind the TV or out of visual range of the remote. 6’ in length. DIRECTV™ approved.
One end of the DirecTV receiver IR pass through cable has a connector that plugs into the output jack. The other end of the cable has an IR transmitter like the one in your remote control, which you place on top of the IR receiver on a device that’s behind a barrier such as a cabinet door. When the TV receives an IR signal, it sends the same signal through the DirecTV receiver IR pass through cable, which flashes the IR signal directly into the other component’s receiver. Place the IR receiver in a location where it can receive the signal from a remote control, such as a universal remote, and connect the hidden devices to the repeater. The repeater will send the signal it receives to each connected device.
Having trouble controlling your H25 receiver because it’s mounted out of sight? Use this DirecTV receiver IR pass through 3.5mm to RJ12 Jack cable to use your television’s IR functionality to pass through remote control signals to the H25 receiver. This is installed either behind the TV or out of visual range of the remote. This product is 6-feet in length and DIRECTV-approved. You may also be interested in the DirecTV receiver IR extender cable . More information on DirecTV receiver IR pass through Cables